User Manual
Table Of Contents
- Front Page
- Preface
- Contents
- Figures
- Abbreviations
- 1. Safety
- 2. Introduction
- 3. Installation
- 4. Commissioning
- 5. Functional Description and Design
- 6. Optionals
- 7. Repeater Alarms
- Index
- Questionnaire
Figure 3-3 shows a bracket attachment to a pole using the mounting
bracket and the clamps provided with the bracket.
Figure 3-4 shows a bracket attachment to a mast using two angle
irons and four M6 (1/4") screws. The screw heads can be slided into
the bracket profile as shown in the figure.
Figure 3-3. Attaching the bracket to a pole
Figure 3-4. Attaching the bracket to a mast
ALLGON Systems AB ALR Compact Repeater Installation
VD203 67/EN - User’s Manual Rev. 1A 2000-07 3 - 4