User Manual

6. Connect the Repeater to Repeater Link cable, if this optional feature
is to be used. The R2R net cable is connected to the P118 or P124
Repeater to Repeater Link ports to the right in the repeater.
The P118 and P124 Repeater to Repeater Link port s are described
on page 3-10 and page 3-12.
Free strain relief bushings at the bottom of the repeaters are used for
the external net cable.
7. Connect a PC for controlling the repeater. A COM port on the PC is
connected to the P112 PC port located to the right in the cabinet (see
Figure 3-7 on page 3-9). Use a standard RS-232 serial cable.
Port P112 is described on page 3-10.
Now, you can commission the repeater as described in Chapter 4.
ANT
HI LO
ANT
LO HI
ANT
HI LO
ANT
LO HI
ANT
HI LO
ANT
LO
HI
Installation ALR Compact Repeater ALLGON Systems AB
3 - 8 Rev. P1D 2000-05 VD203 67/EN - User’s Manual