User Manual

Connection
1. Connect the service antenna (MS) and donor antenna (BS) coaxial
cables (see Figure 3-6). N type female connectors are used in the
repeater.
The donor antenna (BS) is connected to the right in the cabinet.
The service antenna (MS) is connected to the left in cabinet.
2. Make sure the mains connector is connected to the power supply
unit, PSM.
For repeaters supplied from the mains, the mains outlet must be
grounded. Connect the yellow/green cable part to ground.
Both the mains plugs of repeaters equipped with two power supply
units must be connected to outlets supplied from the same fuse.
ANT
HI LO
ANT
LO
HI
MS
BS
Mains
Figure 3-6. MS and BS antenna connections
Installation ALR Compact Repeater ALLGON Systems AB
3 - 6 Rev. P1D 2000-05 VD203 67/EN - User’s Manual