User Manual
Table Of Contents
- Front Page
- Preface
- Contents
- Figures
- Abbreviations
- 1. Safety
- 2. Introduction
- 3. Installation
- 4. Commissioning
- 5. Functional Description and Design
- 6. Optionals
- Index
- Questionnaire
Figure 3-3 shows a bracket attachment to a pole using tensioning
devices.
Figure 3-4 shows a bracket attachment to a mast using the two
provided angle irons and four screws. The screw heads are slided
into the bracket profile.
Figure 3-3. Attaching the bracket to a pole
Figure 3-4. Attaching the bracket to a mast
Installation ALR Compact Repeater ALLGON Systems AB
3 - 4 Rev. P1D 2000-05 VD203 67/EN - User’s Manual