User Manual
Table Of Contents
- Front Page
- Preface
- Contents
- Figures
- Abbreviations
- 1. Safety
- 2. Introduction
- 3. Installation
- 4. Commissioning
- 5. Functional Description and Design
- 6. Optionals
- Index
- Questionnaire
Mounting
The ALR repeater is easy to mount, either by anchoring the repeater in
the fixing holes, or using the an optional mounting bracket.
The mounting bracket is shown in the figure.
1. Mount the repeater.
Normally, the repeater is mounted on a wall, pole, or mast. These
mounting cases are shown below.
Figure 3-2 shows how to mount the repeater to a wall using four
fixing screws.
ANT
HI LO
ANT
LO
HI
Figure 3-2. Attaching the repeater to a wall
ALLGON Systems AB ALR Compact Repeater Installation
VD203 67/EN - User’s Manual Rev. P1D 2000-05 3 - 3