User Manual

Dimensions and Weights
The dimensions of the repeater, including the mounting bracket, is shown
in Figure 3-1. The repeater chassis consists of two main parts, a cabinet
in which the circuitry is housed, and a cover, which can be either a thin
cover or a large cover (see the figure) depending on the configuration.
Approximately repeater weight
Repeater with thin cover ........................................................... 10 kg (22 lbs)
It is not recommended to remove the cover from the cabinet at the site.
However, if the cover, for some reason, has to be removed from the
cabinet, then disconnect the interconnection cables, close the cover,
remove the hinge shafts, and remove the cover.
385 (15.2")
385
(15.2")
110
(
4.3"
)
Mounting bracket
Cabinet
Thin cover
Large cover
Figure 3-1. Repeater dimensions
Installation ALR Compact Repeater ALLGON Systems AB
3 - 2 Rev. P1D 2000-05 VD203 67/EN - User’s Manual