User's Manual
Table Of Contents
044-05454 Rev A 2-1
Chapter 2
Controls and Indicators
Introduction
This chapter contains descriptions of the G3L-850-180 Multi-Carrier Power Amplifier (MCPA) controls and
indicators.
MCPA Controls and Indicators
The location of the MCPA controls and indicators are illustrated in Figure 2-1 and listed with descriptions in
Table 2-1.
MCPA Alarms
MCPA alarm conditions are reported to the system as logic level signals through the rear connector. The front
panel LED provides a visual reference for the operator of MCPA status. Refer to Table 2-1 for a listing of LED
states. Refer to Table 2-2 for a listing of Alarm states.
180W
Figure 2-1 MCPA Controls and Indicators
Multicolor
OFF/ON/RESET Switch
LED Status Indicator