User's Manual

Connections Nexus FT RMR
3-2 044-05326 Rev B
Connections
Downlink and Uplink
RF and fiber cable connections should be verified both internally and externally before powering up the
equipment. Verify these connections with the as-built drawings and documents for your specific system
configuration. Table 3-1 and Figure 3-1 show the steps to connect the RMR module to the Nexus Fiber Base
Unit (FBU) at the head end.
Table 3-1 Connection Procedure
Figure 3-1 RMR to FBU and Service 1/2 Connections
Step Action
1 Connect a fiber cable between the RMR fiber terminal and a head end device, such as the FBU.
2 Connect an RF cable between the customer’s system and the Service 1 and Service 2 ports on the
RMR.
Fiber cable
Service 2
Service 1