User's Manual

Nexus RT Mounting
044-05311 Rev A 3-3
Mounting the Nexus RT on the Bracket
1. After installing the mounting bracket, insert the mounting screws into the bracket, then hook the upper
supports on the Nexus RT over the mounting screws, as illustrated in Figure 3-3.
Figure 3-3 Attaching the Nexus RT upper supports
2. Align the lower supports with the mounting holes on the bracket, then insert the lower mounting screws,
as shown in Figure 3-4
Figure 3-4 Attaching the Nexus RT lower supports
3. Tighten the screws using a 6mm hex socket wrench to secure the Nexus RT tn place.
Locking cylinders, used to prevent unauthorized removal of the repeater, can be inserted and locked with a
key after the lower screws have been tightened.
4. Verify that the donor antenna (directed toward the Base Tranceiver Staton antenna) and the service
antenna (directed toward the area to be covered by the Nexus RT) are mounted and installed properly.