User's Manual Part 3

OS-1933-E3-003 Rectifier
3-8 044-05243 Rev A
Status Verification
Rectifier
The rectifier module, shown in Figure 3-6, powers up automatically when AC power is applied to the OS. The
dual color LED indicator located at the upper-right side of the front panel displays rectifier status as listed in
Table 3-11.
Figure 3-7 Rectifier Front Panel
Table 3-10 Status Verification
Step Action
1 Select the Status/Static Page. See Figure 3-16.
2 Verify the OS System is configured correctly.
3 Select the Status/Alarms Page. See Figure 3-18.
4 Verify that none of the parameters display FAIL.
5 Select the Status/Dynamic Page. See Figure 3-17.
6 View the operating performance of measured system parameters:
a. Forward and Reflected Sector Power
b. Sector Output Return Loss
c. Alarm Status
d. MCPA and Rectifier module status
e. Critical temperatures, voltages and currents
Table 3-11 Rectifier Status Indicator
LED Conditions Function
GREEN DC on
AMBER/GREEN Warning
AMBER DC off
LED Indicator