User's Manual Part 3

OS-1933-E3-003 Alarm Functions
3-16 044-05243 Rev A
My ID Number – Entry will assign a unique address to the system. The address is useful for identifying
individual booster cabinets.
Cascade Code – Enter the code required for wireless modem interface.
Serial Number – Display only.
Misc – System Version, display only.
User ID – Change from default “User”.
Password – Change from default “Password”.
Submit – Click to accept all changes.
Alarm Functions
Alarm Status Indicators (front panel)
There are three dual element LEDs displaying the system status. Each LED is mapped to a sector. The LED is
defined by the following chart:
PC Interface (front panel)
An RS232 interface for testing purposes.
Ethernet Interface (front panel)
Connect Ethernet on controller to Ethernet interface on PC with a crossover RJ45 cable. This port is intended
for local control and monitoring on a temporary basis
Table 3-14 LED Functions
RATE COLOR PURPOSE
Solid Green Normal
1 Hz Green FW Download
Solid Red Critical Fault / Bypass
Solid Red &
Green
Minor/Major Fault