User's Manual Part 2

Field Replaceable Parts and Modules OS-1933-E3-003

044-05243 Rev A 4-9

Fan Assembly Removal and Replacement

Perform the instructions in Table 4-8 to remove and replace the fan assembly shown in Figure 4-5.

CAUTION: Ensure the fan assembly is replaced by the correct type. Front fans and rear fans are assem-

bled different per air flow.

Figure 4-5 Fan Assembly Removal and Replacement

Table 4-8 Fan Assembly Removal and Replacement Procedures

Step Action

Open appropriate cabinet door.

2 Disconnect fan connector.

3 Pull out on four fasteners that secure fan assembly, then remove fan assembly.

4 Align fan assembly and push in fasteners to reattach fan assembly, then reconnect fan connector.

Fan Assembly

Connector

Fan

Fasteners (4)