User's Manual Part 2

OS-1933-E3-003 Introduction
5-2 044-05243 Rev A
Mechanical Specifications/Features
Input RF Connector 7/16 DIN
Output RF Connector 7/16 DIN
AC Power Connection Screw terminal barrier block (5-20 AWG)
Housing IP55 IP rating
Dimensions Refer to Figure 5-1 Outdoor System Dimensions
Weight populated 175 kg (386 lbs)
Minimum Clearances Front Door:
152.4 mm (6 in.) for airflow, 431.8 mm (17 in.) for opening
door, 914.4 mm (36 in.) for installation and removal of
modules
Rear Door:
152.4 mm (6 in.) for airflow, 431.8 mm (17 in.) for opening
door
Hinge Side: 304.8 mm (12 in.) for 135 deg door opening
(Preferred), 7.62 mm (3 in.) for 90 deg door opening
Lock Side: 12.7 (0.5 in.)
Bottom: 152.4 mm (6 in.)
Seismic Zone 4 (GR-63-CORE, Section 4.4.1, Issue 1
Environmental Specifications/Features
Environmental Application Outdoor
Operating Temperature Range -20 °C to +50 ºC
Storage Temperature Range -40 °C to +85 ºC
Humidity +5% - +100% RH @ +40°C
Cooling DC fans
Acoustic Noise <65 dBA (GR-487-CORE, Section 3.29, Issue 2)
Altitude -60 to 4000 meters
Seismic Zone 4 (GR-487-CORE, Section 3.29, Issue 2)
Transportation Shock IEC 60068-2-29, 100 bumps per axis.
Transportation Bounce IEC 60068-2-55 Test Ee, Method A: Bounce 1.1 to 1.2 g, 6
sides with 90° horizontal rotation ½ through each side. 180
minutes total test time. This test is applicable to non-
palletized equipment only.
Transportation Vibration GR-63 CORE, Section 4-4-4
Handling Drop (Packaged) GR-63 CORE, Section 5.3.1
Unpackged Drop GR-63 CORE, Section 5.3.2
Operational Vibration 2.0g over vib. freq. range of 5 to 200 Hz
Wind Speed 50 m/s
Table 5-1 Outdoor System Specifications (Continued)