User's Manual

D044-13432 Rev A 11
Chapter 4
Return for Service
4 Introduction
This chapter contains return for service and parts and accessories information for the LNKF100
Modules.
4.1 Return For Service Procedure
When returning products to Powerwave Technologies Inc., the following procedures will ensure
optimum response.
4.1.1 Obtaining An RMA
A Return Material Authorization (RMA) number must be obtained prior to returning equipment to the
factor for service. Please contact our Repair Department at [phone] to obtain this number, or
FAX your request to [phone] or
mailto:[e-mail]. Failure to obtain this RMA
number may result in delays in receiving repair service.
4.1.2 Repackaging For Shipment
To ensure safe shipment of the amplifier, it is recommended that the original package designed for
shipping the amplifier be reused. If it is not available, contact Powerwave Technologies Inc. Customer
Service Department for packing materials.
4.2 Parts and Accessories
Parts and Accessories for the LNKF100 Modules may be purchased by contacting Powerwave
Technologies Inc. at 1-888-PWR-WAVE. When ordering a replacement part, please provide model
number, serial number and software version number.