User's Manual

Models
1-2 DCM000000104 Rev Q
1.2 Models
Table 1 Available Models and Descriptions
MODEL DESCRIPTION
US800TP
USU Remote
Module
Wall, shelf, or rack mounted remote module that connects to
the single mode fiber optic distribution line and provides a
single duplex antenna RF distribution connection. This
model covers 800MHz Trunking / iDEN / Public-Safety
Services
(806-824 MHz / 851-869 MHz).
US800C
USU Remote
Module
As above, but this model covers 800MHz Cellular Services
(824-849 MHz / 869-894 MHz)
US900P
USU Remote
Module
As above, but this model covers 900MHz Paging Services
(896-902 MHz / 928-941 MHz)
US1900P
USU Remote
Module
As above, but this model covers 1.9GHz PCS Services
(1850-1910 MHz / 1930-1990 MHz).
US1800G
USU Remote
Module
As above, but this model covers 1.8GHz GSM Services
(1710-1785 MHz / 1805-1880 MHz).
US900G
USU Remote
Module
As above, but this model covers 900MHz GSM Services
(890-915 MHz / 935-960 MHz).
US700PS
USU Remote
Module
As above, but this model covers 700MHz GSM Services
(764-776 MHz in DL / 794-806 MHz in UL).
Note that for each model above there is a model with a "-2" suffix. These extra
models have separate Rx and Tx RF Ports instead of a combined transceiver
(antenna) port.
US-PS01
Power supply for 1 US remote module.
LNKFIB-H03
Headend Module
This is a 1U high, 19" rack-mount module providing low
signal level interfacing between Headend RF modules and 8
pairs of single mode fiber optic distribution lines. The 8 fiber
optic pairs are in two groups of four, with the RF connections
combined inside the module in those groupings.
LNKFIB-H04
Headend Module
This is a 1U high, 19" rack-mount module providing low
signal level interfacing between Headend RF modules and 4
pairs of single mode fiber optic distribution lines. The RF
connections for the 4 fiber optic pairs are combined inside
the module.