User's Manual

DCM000000104 Rev Q 2-1
Chapter 2
Mounting
2 Introduction
This chapter contains mounting information for the LinkNet Uniserv Unit RF-FIBER Interface and
Remote Modules.
2.1 LNKFIB-H03 and LNKFIB-04 Headend Modules
These headend modules are intended for mounting in standard 19” racks.
2.2 US Remote Modules
The US remote modules may mount upon horizontal or vertical panels made of either wood or
metal. If mounted on vertical panels, they must be mounted
sideways
so that the fiber optic and
electrical connections do NOT face either up or down. The Remote Modules are secured with six
mounting screws or bolts as shown...
Figure 4 US Remote Modules Mounting