User's Manual

044-05210 Rev A 5-1
Chapter 5
Specifications
5.1 Specifications
Table 5-1 IPT Functional and Physical Specifications
Frequency Range 1930 to 1990 MHz
Instantaneous Bandwidth 15 MHz
Total Typical / Maximum Input Power N/A
Total Output Power 60.2 watts (47.8 dBm) typical
Adjacent Channel Leakage Power Ratio ACLR1 less than -33.5 dBc
ACLR2 less than -54.8 dBc
RF Gain N/A
Gain Flatness Better than +/- 0.5 dB
Output Protection Mismatch protected
Input Port Return Loss N/A
Harmonics Less than -34 dBm / 1 Mhz
Out of Band Spurious Lower -27 dBm / Higher -27 dBm
Duty Cycle Continuous
DC Input Power From -57.6 Vdc to -38.4 Vdc (-48 Vdc nominal)
Current limit is 10.1 amps, 9.8 amps typical (at -48 Vdc)
Operating Temperature -33 to +45 °C Normal Operation
-45 to +55 °C Exceptional Operation*
-50 to +60 °C Nondestructive Operation**
Storage Temperature -25 to +55 °C
Operating Humidity 15 to 100% Normal Operation
8 to 100% Exceptional Operation*
5 to 100% Nondestructive Operation**
Storage Humidity 10 to 100 per cent
RBS / IPT communication
RF Input Connector SMA-Female
RF Output Connector SMA-Female
Power Consumption Less than 207 watts maximum during normal operation
186 watts typical, 60 watts maximum at low temperature start
Weight 7.3 lbs. (3.3 kg.)
Dimensions Refer to Figure Figure 5-1 and Figure 5-2