User's Manual

044-05156 Rev C 57
12 VDC 105 AH Battery Model 920-00337-003 Specifications
Cells / Volts 6 Cells / 12 Volts (DC)
Terminal Type Threaded Copper Insert, ¼ inch
Capacity @ 77 ºF (25 ºC) 105 AH (8 hrs) to 1.75 Volts (DC) per cell
Operating Temperature -40 ºC to +60 ºC (-40 ºF to +140 ºF)
Charging Voltage / Current 2.27 to 2.30 Volts (DC) per cell, constant voltage at a maximum current of C/4 amps
Temperature
Compensation
nSubtract 3mV/ °C/cell above +25 °C or 1.7 mV/°F/cell above 77 °F
nAdd 3mV/ °C below +25 °C or 1.7 mV/°F/cell below 77 °F
Storage time from a fully
charged condition
6 months at 25 °C / 77 °F; for each 9 °C / 15 °F rise, reduce storage time by half
Self discharge rate < 2% per month at 25 °C / 77 °F
AC ripple from charging
source
1.5% peak to peak of float
Overall dimensions Inches: 21.96 L x 4.86 W x 8.93 H; mm: 558 L x123 W x 227 H
Weight 90 lbs / 41 kgs
Specifications as provided by Power Battery Company, Inc., Document Number 1606-1-0310
I
2
R SA120-40 AC Lightning Arrestor Specifications
Item UOM Specification
Tested to IEC 61643-1
Arrester class acc. to IEC 61643-1 II
Nominal voltage (50/60 Hz) U
N
120V
Max. continuous operating voltage U
C
170V
Max. discharge current at wave shape I
max
(8/20) I
max
40kA
Nominal discharge current at wave shape I
n
(8/20) U
P
20kA
Voltage protection level at I
n
I
n
<850V
Response Time t
a
<25ns
Recommended back-up fuse 160AgL/gG
Short-circuit withstand capability I
P
60kA
ef
Recommended cross-section of connecting
conductors
θ
25mm
2
(solid)
16mm
2
(flexible)
Operation temperature range -40 to +80 ºC
Protection type acc. to CSN EN 60529 IP 20
Mounting on DIN rail 35mm
Housing’s material FRNC-UL94VO Flame Rating
Weight 3.2 oz (90g)
Potential free signal contact electrical strength against surrounding circuits 3750Vef
electrical strength against network circuit 3750Vef
insulation resistance 2x107W
max. switching current ~0,5A
max. switching voltage ~250V
Specifications as provided by Transtector, Inc., Document Number 1458-009_Rev0 (R8-11/04/02)