User's Manual

044-05156 Rev C 5
2. Revision History
Release Date Revision Level Comments
Jan 23, 2004 Rev. A Initial Draft
May 14, 2004 Rev. A.01 Revised layout (no formatting)
Separated sections to independent manuals
Significant updates to all text and graphics
Rev. B Correct battery part number in section 4.0
Updated cabinet figures in section 4.0
Minor update to SIM interface in AC Power Wiring Diagrams in section 4.1
Inserted all new documentation for sections 4.7.2 to end of document
3. Introduction
3.1 Symbols - Warnings, Cautions, and Notes
Warnings, Cautions, and Notes are found throughout this manual where applicable. The associated icons are used
to quickly identify a potential condition that could result in the consequences described below if precautions are not
taken. Notes clarify and provide additional information to assist the user.
Warning This warning symbol means danger. You are in a situation that could cause bodily injury.
Before you work on any equipment, be aware of the hazards involved with electrical and RF
circuitry and be familiar with standard practices for preventing accidents.
Caution
This caution symbol means reader be careful. In this situation, the user might do something that
could result in equipment damage or loss of data.
Note This note symbol means reader take note. Notes contain helpful suggestions or references to
material not covered in the document. Procedures are not contained in notes.
3.2 Equipment Changes
Powerwave Technologies, Inc. reserves the right to make changes to the subject equipment, including but not
necessarily limited to component substitution and circuits. Changes that impact this manual may subsequently be
incorporated in later revisions.
3.3 System Components and Documents
The table lists the model numbers and descriptions of the major components that comprise the OPAF system and
the document number of the manual related to each component.