User's Manual

G3S-800-140 Installation & Service Manual
044-05095 Rev. A 3-1 February 2001
Section 3 Operating Instructions
3-1 Introduction
This section contains operating instructions for the Multicarrier Cellular Amplifier System.
3-2 Location And Function Of Amplifier Module Controls And Indicators
Primary +27 Vdc power is applied to the amplifier via a 100-amp circuit breaker (ON-OFF) located
on the left side of the amplifier front panel.
The plug-in amplifier module RF control and indicators, located in the center of the amplifier front
panel between the cooling fans, are shown in figure 3-1. The status and RF control functions are
described in detail in table 3-1. The alarms are described in detail in table 3-2.
Figure 3-1 G3S-800-140 Amplifier Module RF Control and Indicators