User Guide

PARALLEL INSTALLATION
EATON Powerware
®
9155 Parallel UPS (8–15 kVA) User’s Guide S 164201592 Rev C www.powerware.com
17
10. Verify that each UPS battery circuit breaker is in t he OFF position
(see Figure 9).
ON
OFF
UPS Wiring
Access Cover
Conduit Landing
Battery
Connector
Battery Circuit Breaker
Figure 9. UPS Rear View (2-High Shown)
11. From each UPS, remove the UPS wiring access cover and retain
(see Figure 9).
12. Hardwire the UPS input terminations (TB1-1 through TB1-5) for
each UPS.
See Table 2 for specifications and Figure 10 for a detailed view of
the UPS terminal block.