5119 User's Guide

Configuration
16
Powerware
®
5119 User’s Guide www.powerware.com
CAUTION
DONOTpressthe Off button while theUPSisin Configurationmode; pressing
the Off
button removesallpower to your equipment.
1. Press and hold the On button and the button
simultaneously for one beep. The UPS switches to
Configuration mode.
2. Press the On
button to scroll through the options. Each time
youpress the button,the UPS beeps. The LED for the selected
option blinks (see Figure 14 and Table 1).
If you press the On
button and nothing happens, the UPS is
still in Operation mode. Repeat Step 1 for one beep ONLY to
enter Configuration mode, and then perform Step 2.
3. Press the
button ONCE to toggle the selected option on or
off. The Power On indicator corresponds with the current
setting.
Repeat Steps 2 and 3 for each option.
4. Press the On
button and the button simultaneously to
return to Operation mode at any time. Scrolling past the last
LED also returns the UPS to Operation mode.
Press the On button
to scroll to the next option.
Press the On and Test/Alarm Reset
buttons simultaneously to toggle between
Configuration and Operation mode.
Press the Test/Alarm Reset
button to toggle an option on or off.
&
Power On Indicator
LEDs
Figure 14. Using the Configuration Mode