User's Guide Power Supply 3115

Installation
5
Powerware
®
3115 User’s Guide www.powerware.com
5. Start the UPS by pressing the button as shown in Figure 2.
The Power On indicator illuminates indicating that power is
available from the rear receptacles.
On/Off Button
Power On Indicator
Test/Alarm Reset Button
Figure 2.Powerware 3115Front Panel
The UPS conducts a self-test and enters Normal mode. If the
alarm beeps, consult “Troubleshooting” on page 23.
NOTE The UPSchargesto 90%in approximately12 hours.However,it is
recommended thatthe UPSchargefor 24 hoursafter installation or long storage.