User Manual
One-click return-to-home
Aircraft altitude: it displays N/A if there is no value, and displays the current altitude of the aircraft
if there is a value.
Man-machine distance: the distance between the aircraft and the operator.
Vertical velocity: velocity of vertical rise and fall of the aircraft.
Horizontal velocity:the ight velocity of the aircraft at current level.
Flight duration:ight duration for aircraft.
Satellite signal:the number of satellite signals received by the GPS of the aircraft. The aircraft can
guide the ight route and trail via satellite signal. Twenty is the maximum number of possible
signals received by the GPS of the aircraft.
Base station signal:the strength of signal will impact the eciency of the aircraft and base station
to receive and send information.
Equipment connection status: display of information on connection status of the equipment.
Battery level of the aircraft: it displays N/A if there is no value and displays a percentage (100%) if
there is a value.
Battery level of the base station: it displays N/A if there is no value and displays a percentage
(100%) if there is a value.
Smart ight menu:waypoint planning, ight mode, return-to-home point setting and safe mode
setting.
One-click return-to-home: the aircraft return-to-homes automatically; if “return-to-home point
setting” is set, it return-to-homes to the user assigned location; if “return-to-home point setting” is
not set, it return-to-homes to the takeo point. See the “Smart return-to-home” section for details.
Route planning
Click “waypoint planning” to select the planned points on the map and plan a route by point
selection on the map and automatic connection. The velocity, height, hovering duration and
other parameters of each waypoint may be set. Upon the completion of planning, click Start, and
then the aircraft will automatically execute the ight mission.
41