User Manual

For the connection of wireless base station, power on the aircraft and the wireless base station; wait
for about 35 seconds, when the 3 Led lights beside the power key are constantly on, the wireless
base station is successfully connected to the aircraft. See the gure below:
The number of LED lights indicates the strength
of the wireless signal connection.
Frequency adjustment of base station
Steps:
1. Switch on the aircraft and the base station, and wait for the initialization of the aircraft.
2. Use Vision+ to connect to base station.
3. Press the power key of the aircraft for 10s until the tail status indicator in blue ashes slowly; 3
seconds later, press the power key for 10s until the tail status indicator in blue changes from slow
ash to constant light. It enters into frequency adjustment function.
Low HighWireless signal
34
Blue light ashes slowly