User Manual
Start-up and shutdown of gesture-based remote controller
The remote controller may be started by sliding the power switch from the left to the right. The
connection status of the remote controller may be distinguished according to the notication tone
of the remote controller. When the remote controller plays music for 1 second, it indicates that the
communication connection between the remote controller and the aircraft is successful. Slide the
power switch from right to left to shut down the remote controller.
Charging of gesture-based remote controller
1.Connect the charger to an AC power source (100-240V, 50/60HZ; use a power converter if neces-
sary);
2.Connect the battery and the charger when the battery is on or o;
3.During charging, when the standard remote controller is shut down, the battery level indicator will
turn red and then turn green when it is fully charged;
4.During charging, when the standard remote controller is on, the battery level indicator will show
the battery level of the lithium battery:
Switch on the power switch
on off
29
Left joystick: Up and down control the upward and downward movement of the aircraft; left
and right control the horizontal rotation of the aircraft.
Right joystick: Up and down control the forward and backward movement of the aircraft; left
and right control the left and right movement of the aircraft.
Mode 2: The left joystick of the remote controller controls the up/down of the aircraft.
Mode 1: The right joystick of the remote controller controls the up/down of the aircraft.