User Manual

SStandard remote controller has a three-color battery level indicator. The indicator shows the
battery level of the battery when the remote controller is on (whether charging or not):
In case of charging when the remote controller is o, the indicator is red, indicating charging;
when the remote controller is fully charged, the indicator is green, indicating full charging; in
case of emergency alarm during ight, the battery level indicator ashes four times each second
in the current color.
Indicator for standard remote controller
Alarm
27
Left joystick: Up and down control the upward and downward movement of the aircraft; left
and right control the horizontal rotation of the aircraft.
Right joystick: Up and down control the forward and backward movement of the aircraft; left
and right control the left and right movement of the aircraft.
Start of motors: Position both joysticks towards the bottom center like a “V” to unlock within
2 seconds, i.e. the left joystick towards lower right corner and right joystick towards lower
left corner.
Emergency locking：In case of emergency, press the combination keys, i.e. the ascend/de-
scend joystick at the lowest + heading at the most left + return-to-home button locking
propeller, for 2 seconds for emergency shutdown. This may be used in case of emergency.
The aircraft will drop vertically due to loss of power. Under normal circumstances, the motor
may be automatically stopped when the aircraft lands.
One-click takeo/landing button: When the aircraft has not taken o, press and hold the key
until there is a vibration, and the aircraft begins to take o; when the aircraft takes o, press
the key again until there is another vibration, and the aircraft begins to land; short press the
key in the process of landing, the aircraft stops landing.
One-click return-to-home：When the aircraft is not in return-to-home status, press the key until
there is a vibration, and the aircraft begins to return-to-home; when the aircraft is in
return-to-home status, short press the key until there is another vibration, and the aircraft stops
return-to-home.
Landing gear button: long press the button until vibration to retract the landing gear; short
press the button to deploy the landing gear.
Left nger wheel:for the control of the gimbal pitch.
Right nger wheel:for the control of gimbal yaw.
Left top button:The gimbal back to position by short pressing the key; press the key until there is
a vibration, and the gimbal faces downward; short press the key for 2 times, sele mode is
triggered.
Right top button: Short press the key to take a photo; when it is not shooting video, press the
key until there is a vibration, and camera shooting starts; during video shooting, press the key
until there is a vibration, and video shooting stops.
Flight mode switcher: P/N/E; P: Professional (manual); N: standard (Normal); E: Easy Control (the
direction away from the remote controller is the front of the aircraft).
Type of Alarm
Prompt
Button Backlight
Color of Three-Color
Light
Buzzer
Aircraft return-
to-home prompt
The backlight of return-to
-home key is normally on
Dripping sound, 1 cycle
for buzz per second
Aircraft takeo/
landing prompt
The backlight of takeo/
landing key is normally on
No action
No action
No action
No action
Low power alarm No action
Dripping sound, 4 cycles
for buzz per second
The red light is
normally on
Not positioned
by GPS
No action
1 cycle per second in
the color of current
battery level
Mode 2: The left joystick of the remote controller controls the up/down of the aircraft.
Mode 1: The right joystick of the remote controller controls the up/down of the aircraft.