User Manual

exceptions of the battery, including battery short-circuit, excessive discharging current, etc.
12. Sleep protection: the battery will enter into sleep if it is not connected to any electrical equip-
ment 20 minutes after it is turned on.
13. Communication: the aircraft can acquire real-time information of the battery through the com-
munication interface on the battery, including voltage, battery level and current.
The battery of the remote controller should be charged with the special charger ocially desig-
nated by PowerVision, which will not be liable for any consequences caused by charging the
battery with the charger not ocially provided by PowerVision.
The intelligent battery has the following functions:
1.Battery status display: the battery has a status indicator to indicate current status of the battery.
2.Battery life display: the battery has a status indicator to indicate life of the battery.
3.Self-discharging protection for battery storage: if the battery is stored for 10 days without any opera-
tion when its battery level is higher than 65%, it can trigger the self-discharging function to lower the
battery level to 65% for the protection of the battery. The self-discharging process may last for about
two days with no LED indication. The battery may heat up slightly, which is normal.
4.Balance charging protection: cell voltage of the battery can be automatically balanced to protect
the battery.
5.Overcharging protection: Charging will be automatically stopped when the battery is full.
6.Charging temperature protection: the battery will be damaged if it is charged at a temperature
lower than 0 or higher than 40. This function is to ensure the battery will not be charged at such
temperatures.
7.Overcurrent protection during charging: heavy current charging can severely damage the battery.
Charging will be stopped if the current exceeds 8A.
8.Over-discharging protection: over-discharging can severely damage the battery. The battery output
will be cut o if it is discharged to 12V.
9.Short-circuit protection: the output will be cut o to protect the battery if short-circuit is detected.
10.Cell damage detection: a warning for battery damage will be sent out if cell damage or signicant
cell imbalance is detected.
11.Records of use exceptions of the battery: the app can provide the records of the last 31 times of use
Control of standard remote controller
P
N
E
Battery level indicator
Less than 10%10%-30%More than 30%
25
Standard Remote Controller
2
2
3.5 hours for full charging
Left joystick: Up and down control the upward and downward movement of the aircraft; left
and right control the horizontal rotation of the aircraft.
Right joystick: Up and down control the forward and backward movement of the aircraft; left
and right control the left and right movement of the aircraft.
Mode 2: The left joystick of the remote controller controls the up/down of the aircraft.
Mode 1: The right joystick of the remote controller controls the up/down of the aircraft.