User Manual
exceptions of the battery, including battery short-circuit, excessive discharging current, etc.
12. Sleep protection: the battery will enter into sleep if it is not connected to any electrical equip-
ment 20 minutes after it is turned on.
13. Communication: the aircraft can acquire real-time information of the battery through the com-
munication interface on the battery, including voltage, battery level and current.
The remote controller may be started by sliding the power switch from the left to the right. The
connection status of the remote controller may be distinguished according to the notication tone of
the remote controller. When the remote controller plays music for 1 second, it indicates that the com-
munication connection between the remote controller and the aircraft is successful. Slide the power
switch from right to left to shut down the remote controller.
1.Connect the charger to AC power supply (100-240V, 50/60HZ; use a power conversion plug when
necessary)
2.Connect the battery to the charger, with the battery turned on or o.
3.During charging, when the standard remote controller is shut down, the battery level indicator will
turn red and then turn green when it is fully charged.
4.During charging when the standard remote controller is on, the battery level indicator will show the
battery level of the lithium battery:
Switch on the power switch
The intelligent battery has the following functions:
1.Battery status display: the battery has a status indicator to indicate current status of the battery.
2.Battery life display: the battery has a status indicator to indicate life of the battery.
3.Self-discharging protection for battery storage: if the battery is stored for 10 days without any opera-
tion when its battery level is higher than 65%, it can trigger the self-discharging function to lower the
battery level to 65% for the protection of the battery. The self-discharging process may last for about
two days with no LED indication. The battery may heat up slightly, which is normal.
4.Balance charging protection: cell voltage of the battery can be automatically balanced to protect
the battery.
5.Overcharging protection: Charging will be automatically stopped when the battery is full.
6.Charging temperature protection: the battery will be damaged if it is charged at a temperature
lower than 0℃ or higher than 40℃. This function is to ensure the battery will not be charged at such
temperatures.
7.Overcurrent protection during charging: heavy current charging can severely damage the battery.
Charging will be stopped if the current exceeds 8A.
8.Over-discharging protection: over-discharging can severely damage the battery. The battery output
will be cut o if it is discharged to 12V.
9.Short-circuit protection: the output will be cut o to protect the battery if short-circuit is detected.
10.Cell damage detection: a warning for battery damage will be sent out if cell damage or signicant
cell imbalance is detected.
11.Records of use exceptions of the battery: the app can provide the records of the last 31 times of use
Startup and shutdown of standard remote controller
Charging of standard remote controller
Operation of Standard Remote Controller
24
Left joystick: Up and down control the upward and downward movement of the aircraft; left
and right control the horizontal rotation of the aircraft.
Right joystick: Up and down control the forward and backward movement of the aircraft; left
and right control the left and right movement of the aircraft.
Mode 2: The left joystick of the remote controller controls the up/down of the aircraft.
Mode 1: The right joystick of the remote controller controls the up/down of the aircraft.