User Manual

exceptions of the battery, including battery short-circuit, excessive discharging current, etc.
12. Sleep protection: the battery will enter into sleep if it is not connected to any electrical equip-
ment 20 minutes after it is turned on.
13. Communication: the aircraft can acquire real-time information of the battery through the com-
munication interface on the battery, including voltage, battery level and current.
The intelligent battery has the following functions:
1.Battery status display: the battery has a status indicator to indicate current status of the battery.
2.Battery life display: the battery has a status indicator to indicate life of the battery.
3.Self-discharging protection for battery storage: if the battery is stored for 10 days without any opera-
tion when its battery level is higher than 65%, it can trigger the self-discharging function to lower the
battery level to 65% for the protection of the battery. The self-discharging process may last for about
two days with no LED indication. The battery may heat up slightly, which is normal.
4.Balance charging protection: cell voltage of the battery can be automatically balanced to protect
the battery.
5.Overcharging protection: Charging will be automatically stopped when the battery is full.
6.Charging temperature protection: the battery will be damaged if it is charged at a temperature
lower than 0℃ or higher than 40℃. This function is to ensure the battery will not be charged at such
temperatures.
7.Overcurrent protection during charging: heavy current charging can severely damage the battery.
Charging will be stopped if the current exceeds 8A.
8.Over-discharging protection: over-discharging can severely damage the battery. The battery output
will be cut o if it is discharged to 12V.
9.Short-circuit protection: the output will be cut o to protect the battery if short-circuit is detected.
10.Cell damage detection: a warning for battery damage will be sent out if cell damage or signicant
cell imbalance is detected.
11.Records of use exceptions of the battery: the app can provide the records of the last 31 times of use
21
Lightly touch the key on the top of the battery to light the
four white indicators. The number of indicators indicates
the charge level.
Battery level indicator
Each indicator represents ab-
out 25% of total battery level.
1.The use of the battery at low temperatures (-10℃ to 5℃) will lead to abrupt reduction in battery
capacity and thus signicant reduction in ight duration of the aircraft. When battery temperature
is between -10℃ and 5℃, the aircraft cannot take o unless a certain voltage is satised. Please
fully charge the battery and take thermal insulation measures for the battery before use.
2.It’s not recommended to use the battery at ambient temperature lower than -10℃.
3.It is suggested to end the ight when a low-voltage warning is sent from the PowerEgg Ground
Station in a cold environment.
4.It is suggested that the battery be preheated to over 5℃ at the minimum, or over 20℃ ideally,
before the aircraft takes o in a cold environment.
Precautions for use at low temperatures
The battery of the aircraft must be charged using the special charger supplied by
PowerVision. PowerVision takes no responsibility for the consequences of using any other
chargers.
Battery
1
1
2.5 hours for full charging
Left joystick: Up and down control the upward and downward movement of the aircraft; left
and right control the horizontal rotation of the aircraft.
Right joystick: Up and down control the forward and backward movement of the aircraft; left
and right control the left and right movement of the aircraft.
Mode 2: The left joystick of the remote controller controls the up/down of the aircraft.
Mode 1: The right joystick of the remote controller controls the up/down of the aircraft.