User Manual
Each arm of PowerEgg has a head indicator (head lamp) and an aircraft status indicator (tail lamp).The
following gure indicates the specic locations of the indicators.
exceptions of the battery, including battery short-circuit, excessive discharging current, etc.
12. Sleep protection: the battery will enter into sleep if it is not connected to any electrical equip-
ment 20 minutes after it is turned on.
13. Communication: the aircraft can acquire real-time information of the battery through the com-
munication interface on the battery, including voltage, battery level and current.
Aircraft Status Indicator
Orbit mode
While ying with GPS, the aircraft ies at a height of 10m above the ground. Specify the center
of a circle via Vision+ and manipulate the aircraft to y to any position 10m beyond the center of
the circle. Set the orientation via Vision+ and start the circling mode. During circling, the head of
the aircraft will always point at the center of the circle.
Sele mode
While ying with GPS, the user only needs to press the Sele button on the gesture-based remote
controller when the aircraft is ying. The head of the aircraft will automatically aim at the user.
Waypoint mode
While ying with GPS, the user may set a ight waypoint via Vision+ and the aircraft will y on the set
waypoint trajectory.
Follow-me mode
While ying with GPS, the aircraft can follow the standard or gesture-based remote controller and
move correspondingly at a certain distance, with the ight height adjusted by the remote controller.
Head indicator
Tail status indicator
14
The intelligent battery has the following functions:
1.Battery status display: the battery has a status indicator to indicate current status of the battery.
2.Battery life display: the battery has a status indicator to indicate life of the battery.
3.Self-discharging protection for battery storage: if the battery is stored for 10 days without any opera-
tion when its battery level is higher than 65%, it can trigger the self-discharging function to lower the
battery level to 65% for the protection of the battery. The self-discharging process may last for about
two days with no LED indication. The battery may heat up slightly, which is normal.
4.Balance charging protection: cell voltage of the battery can be automatically balanced to protect
the battery.
5.Overcharging protection: Charging will be automatically stopped when the battery is full.
6.Charging temperature protection: the battery will be damaged if it is charged at a temperature
lower than 0℃ or higher than 40℃. This function is to ensure the battery will not be charged at such
temperatures.
7.Overcurrent protection during charging: heavy current charging can severely damage the battery.
Charging will be stopped if the current exceeds 8A.
8.Over-discharging protection: over-discharging can severely damage the battery. The battery output
will be cut o if it is discharged to 12V.
9.Short-circuit protection: the output will be cut o to protect the battery if short-circuit is detected.
10.Cell damage detection: a warning for battery damage will be sent out if cell damage or signicant
cell imbalance is detected.
11.Records of use exceptions of the battery: the app can provide the records of the last 31 times of use
Power key