User Manual

Smart return-to-home can be realized in three patterns: lost control return, one-click return and low

power return

1.Lost control return

In the case of loss of signal, the aircraft rst hovers in the air and then triggers lost control return in

10 seconds. After gaining signal of the remote controller again, the aircraft switches to the mode

used prior to the loss of signal and continues to y.

2.One-click return

Long press the return-to-home button on the standard remote controller to trigger one-click return.

Short press the button to cancel return-to-home. The aircraft can operate at dierent horizontal

positions via the joystick of the remote controller during the descending process.

3.Low-battery return

When battery level of the aircraft drops to a predetermined level, Vision+ will pop up a message for

the user to decide whether to trigger low-battery return. Click “Yes” to return the aircraft. Return can

be terminated by pressing the automatic Return-to-home key on the standard remote controller.

During the descending process, the user may manipulate the joystick to change the position of the

aircraft in horizontal direction so that it can land in a safe zone.

Note: The aircraft may have obstacles in its path during return-to-home. The user needs to detect

such obstacles via visual observation or image transmission, and avoid these obstacles by means of

ending the return-to-home process or adjusting ight height of the aircraft.

Battery level

LowFull