User Manual

There are three kinds of return points: user location, aircraft starting point and map selection point.
The take-o point of the aircraft will be selected as the return point for default when changed in the
Vision+ app. Each time after power cycling the aircraft, the return point will be automatically reset to
the take-o point. Please select a proper return point each time after power cycling.
Return point
altitude: 20m
If the aircraft ies lower than the return altitude beyond 3.10m, it rst vertically climbs to the return
altitude, then turns the head to the operator and returns to the point above the return point. Then,
the aircraft turns the tail towards the operator, deploys the landing gear and vertically lands on the
ground. During the nal descent, the location of nal landing can be controlled by the joystick of the
remote controller.
Greater than 10m
Less than 20m
Return point
Return point
User location Aircraft starting point Map selection point
Categorization of smart return-to-home
12