User Manual

2.Press the upper cover switch and open the top battery cover. Hold the arms and insert the battery

into the chamber. You’ll hear a clicking sound when the battery ts in the chamber and gets locked.

Note: When replacing the battery while the landing gear is deployed, do not insert the battery

without rst lifting and holding the aircraft. Not doing so may result in your device being damaged.

Preparation of the Aircraft

1.Spread the four arms one by one as shown. You’ll hear a clicking sound when the arms are

properly positioned and self-locked.

3.Take o the lower cover. Note: The lower cover must be removed before the unit is powered on,

otherwise the 4K UHD gimbal camera can become damaged.