Quick Start Guide

P
N
E
P
N
E
19
2.Unlock motors: Position both joysticks toward the bottom center like a “V” to unlock.
3.Take o： Push the throttle stick slowly to let aircraft rise steadily
Automated Take O: After long pressing the take o / landing button on standard remote controller
until it vibrates, aircraft will rise and hover in the air.
4.You can control the gimbal and take photos or videos during the ight.
*Attention： During any flight emergency, pilot can control left joystick into bottom left position, and press and hold
Return-to-Home button to lock and stop the aircraft immediately (Aircraft will cease function and fall. Be wary of your
surroundings).
5.Landing： Slowly pull the throttle stick to let the aircraft land smoothly. Then pull the throttle stick to the
very bottom for 2 seconds until motors stop spinning.
Automated Landing: After long pressing the take o / landing button on standard remote controller until it
vibrates, aircraft will release the landing gear and land (Press takeo/landing button once to cancel
autonomous landing).
* P mode（Professional）： manual ight mode，aircraft maintains the height automatically and pilot using joysticks control the
direction.
* N mode（Normal）： xed point ight mode, aircraft uses GPS or vision positioning system to stay in a place accurately.
* E mode（Easy Control）： Easy mode, aircraft GPS for positioning. Aircraft ight is relative to pilot and not aircraft orientation.