PowerEgg Drone English Quick Guide PEGA-E1.
1. Brief Intro Brief introduction of PowerEgg Controller Standard Controller Maestro™ Base Station 2. Flight Preparation Download App and then watch tutorials Check the battery and charging Prepare the charger Check the battery Charge Prepare remote controller Prepare aircraft and App 3.
Brief Introduction of PowerEgg Aircraft The PowerEgg™ Aerial Camera Drone is equipped with a high precision navigation control system. It is designed to perform indoor and outdoor hovering, flying, autonomous takeoff landing, and Return-to-Home. It is also equipped with advanced technology to bring you functionalities such as Follow-Me, Orbital Flight, Electronic Fencing, and Autonomous Flight modes. The gesture-based controller-PowerEgg Maestro™ simplifies flight operation and gimbal control.
Controller Standard Controller The PowerEgg™ standard controller has integraded “one-click” technology. With one click, users can manage takeoff and landing, Return-to-Home, Follow Me, and have the camera orient toward the pilot.Users can easily perform other tasks by using the standard two-handed controller, including landing gear retraction, gimbal pitch control, gimbal roll control, photo taking, and video recording.
Controller PowerEgg Maestro™ Gesture-Based Controller PowerEgg Maestro™ controller simplifies aircraft operation and navigation by allowing users to control the aircraft through body gestures.It has integrated“one-click” technology that allows users to perform takeoff and landing, Return-to-Home, Follow Me, and selfie taking with a single click. Users can also adjust gimbal pitch, take pictures, and record videos by using the controller.
Controller Base Station The PowerEgg Base Station integrates a with cutting edge UHD image and data transmitting system, which can output the video and flight status to smart phone, tablet and other compatible devices. The maximum distance of image/data transmission in an ideal environment is 3.1 miles. 2 1 3 4 5 How to use bracket is presented in the graph. 1.Battery indicator 2.Image transmitting signal indicator 8 7 3.Power switch 6 4.Cell phone Connection Bracket 5.Tablet Connection Bracket 6.
Flight preparation Download APP and other resuoces Please scan QD code to download Vision + APP, PC Suite, User Manual, Specification and watch video tutorials.
Check the battery and charging Check the battery Aircraft Battery Check the battery indicator Each light indicates 25% battery level Press the button of battery; the illuminated lights indicate the battery remaining capacity Standard Controller P N E Turn on the power Check the battery indicator 30%or above 06 10%-30% less than 10%
Maestro™ Check the battery indicator 30%or above on off 10%-30% less than 10% Turn on the power Base Station Check the battery indicator 60%or above Turn on the power 07 20%-60% less than 20%
Battery ，Standard Remote Controller ，PowerEgg Maestro™ Controller ，and Base Station can be charged simultaneously. 2 3 4 1 1 Aircraft Battery can take ~2.5 hours to be fully charged 2 Standard battery can take ~3.
Prepare the remote controller If using PowerEgg Maestro™ as your controller, connect the base station and the controller through cable. Please connect through this port Please connect through this port If using the standard controller, place the base station on the bracket of the standard controller and connect them through cable.
Prepare the aircraft 1.Open PowerEgg's four arms ，using the position as shown in picture. There will be have a clicking sound Indicating that they are in position. 2. Open the top battery cover. Press the battery into chamber while holding the arms. Attention: Do Not put pressure on the battery, as it may cause damage to the landing gear.
3.Take the gimbal cover off the bottom. 4K 4.Press once and then long press the power button until the blue light is on. After the notification sound, press the power button 3 times in quick succession to deploy the landing gear.
5.Open propellers with both hands. 6.Place the aircraft at a safe distance over 10 meters away from people on suitable ground. The head of the aircraft should face the direction that the pilot is facing.
7.Turn on the standard controller or Maestro™ and base station. + or on off 8.Turn on your mobile device and connect WIFI: Power_Groundxxx. Password is 1234567890.
9.Open Vision+ App . After around 30 seconds, click Start Flying when it shows device is connected. Device is connedted Start Flying Device is connedted Start Flying 10.For outdoor flight under the mode of P/N/E, wait until the aircraft status indicator becomes, and the status indicator of standard controller or Maestro™ turns green. This indicates the aircraft is prepared for unlocking and flight. * The Wi-Fi communication frequency of the base station is 5G.
11.When collapsing your PowerEgg for storage, while holding the aircraft off the ground by one of its arms,press the power button three times in rapid succession, the landing gear will automatically close Close the arms one by one by depressing the trigger located on the under side, making sure to position the propellers so that they fit into the cavity. 12.Take out the battery. Press the battery lock with thumb and index finger while pulling out the battery.
Flight and Safety Flight and shooting Two ways of controlling aircraft: The Standard controller can control the PowerEgg with precision through dual joysticks. It can take off and land, return to home, Follow Me, open and close the landing gear, control gimbal movement, reorient the aircraft, and take photos and shoot videos. Maestro™ provides full control of the aircraft, through gestures and movement of the controller.
3.Flight control ：Press and hold ascend button to desired height, then use the Press and hold the gesture -based control button to navigate the aircraft on gesture-based control button to navigate the aircraft by body gestures. off Gesture-based control experience Gimbal control Camera Shutter / Record Button 4.You can control the gimbal and take photos and videos during the flight.
5.To land the aircraft, press take off/landing button. The aircraft will Long press takeoff/ landing button release the landing gear, land and lock autonomously (Press takeoff/landing button once to cancel autonomous landing). *During any flight emergency, pilots can press the combination of descend button, shooting button, and swipe the gesture-based control button upwards to stop and lock the aircraft immediately, as shown in the picture (Aircraft will cease function and fall.
P N E P N E * P mode（Professional）：manual flight mode，aircraft maintains the height automatically and pilot using joysticks control the direction. * N mode（Normal）：fixed point flight mode, aircraft uses GPS or vision positioning system to stay in a place accurately. * E mode（Easy Control）：Easy mode, aircraft GPS for positioning. Aircraft flight is relative to pilot and not aircraft orientation. 2.Unlock motors: Position both joysticks toward the bottom center like a “V” to unlock. 3.
Flight Safety + Fly in an open space ! + GPS Signal> 13 Satellites + Keep your drone in sight <120m Flying below 120m Please stay away from crowds, electric wires, tall buildings, and airports. Transmitting tower, high voltage wires and large magnetic metal structures may influence the aircraft and cause safety issues.
FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PowerVision www.powervision.me Get it on CHINA +86 400 870 1088 UNITED STATES +1 855 562 6699 EUROPEAN UNION +358 942 450 547 FINLAND +358 942 450 547 GREAT BRITAIN +44 135 936 6050 FRANCE +33 975 186 604 GERMANY +49 157 3599 7721 SPAIN +34 518 880 950 ITALY +39 029 475 6809 POLAND +48 22 307 2388 NETHERLANDS +31 85 888 5010 CZECH REP +42 035 888 0180 Copyright 2017 ©Powervision Robot Inc. All rights reserved.
