PowerRay Quick Start Guide PowerVision
PowerRay PowerRay Introduction Diving preparation 1-4 Check the battery and Charging PowerRay Vehicle Check the battery Base Station Charging Remote controller 5-6 Prepare PowerRay 11-15 Diving and safety Diving and shooting 23-26 Remote controller for diving and Image capture 16-17 App control for diving and Image capture 01 02 03 Fish finder 7-9 PowerSeeker Bait drop Download app and watch 10 PowerRay tutorial videos Prepare remote controller 18 Prepare App 19-20 Prepare VR 21-22
PowerRay Introduction
PowerRay Introduction PowerRay Vehicle:PRA10 PowerRay can dive as deep as 98 feet underwater in freshwater or saltwater. You can set up fixed direction and fixed depth to swim PowerRay. It can be used for underwater photography, videography,fish detecting, and fish luring①. Users can operate PowerRay through VR Goggle②, transmitter, and app to stream real time video. It’s integrated 4K UHD camera provides 12 million pixels for underwater photography and videography.
LED lights 4K UHD Camera Precision bait drop Place for PowerSeeker Vertical motor Charing port LED tail light Horizontal motor 02
PowerRay Introduction Base station:PRABS10 Base station connects to the PowerRay vehicle through the cable. Remote controller, cell phone and VR goggle can connect to the base station and control the PowerRay, camera and receive live feed. The battery inside is 3000mAh and can work for up to 3 hours. Users can check the battery level through the battery indicator. Base station has a rubber belt which helps prevent the unit from slipping into the water.
Reset Power Switch Battery indicator Rubber belt WIFI indicator Rubber belt knob Cable Cable/charging port 04
Remote controller:PRASC10 PowerRay’s transmitter connects with the base station wirelessly. The functions include operating the vehicle, LED lighting adjustment, speed adjustment, underwater photography, underwater videography, precision remote bait drop, fixed the depth and more. Users can operate PowerRay easily through the remote controller. The built-in rechargeable battery’s capacity is 3000mAh and can operate continuously for up to 20 hours.
Speed switch H M L Left joystick Right joystick Bait drop release Camera/Fish finder button Depth maintenance /Manual Switch Battery indicator Right shoulder button Left shoulder button Right dial: front LED light adjuster Left dial Charging port Power Switch 06
Fish finder PowerSeeker:PSE10 PowerSeeker can detect fish and underwater landscape up to 131 feet below PowerRay and sends real time images to the app. The PowerSeeker is equipped with a fish luring light, which attracts fish to come closer. The PowerSeeker can be attached to the PowerRay or detached as a stand-alone fish finding device. Only PowerRay Angler/Wizard has PowerSeeker and bait drop.
PowerSeeker Fish line position Upper Part Charging port Middle part Fish Luring light Bottom part Only PowerRay Angler/Wizard has PowerSeeker and bait drop.
Fish finder device Bait drop Please put fish line on the hook, and operate the PowerRay to drop the bait through Remote controller or on Vision+. Only PowerRay Angler/Wizard has fish finder and bait drop.
Download app and watch PowerRay tutorial videos Download app and watch PowerRay tutorial videos Please scan the QR code on the right side, or search Vision+ on Google Play/APP Store to download the Vision+ App.
Diving Preparation
Check the battery and charging Battery level of vehicle PowerRay vehicle battery level is available from “ Vision+” APP interface.
Battery level of base station check battery indicator Green:above 60% 12 Yellow:60%~20% Red:below 20%
Battery level of fish finder The fish finder will automatically turn on when the charging port touches the water. It will turn off 1 minute after leaving the water. You can read the battery level through Vision+ App.
Charging The PowerRay adaptor can charge the PowerRay, transmitter, and the base station at the same time.
1 Remote controller can take~3.5 hours to be fully charged 2 Base Station can take~2.5 hours to be fully charged 15 3 PowerRay vehicle can take~2.
Prepare PowerRay 1.Turn on the base station 2.Plug the cable into base station. 3.Open the vehicle charging by pressing the power port protector.(make sure switch for 3 seconds.
WIFI PRA_Station_xxx 4.Plug the other side of the cable into PowerRay 5.Use a cell phone or other mobile device and make sure you have a tight connection.(make to turn on the WiFi, connect to sure this is always 100% dry while doing this) “PRA_Station_xxx”, (default password is 1234567890).
Prepare the remote controller Cell phones or tablets can be mounted on the brackets of the remote controller. Turn on the remote controller. It will start searching for the base station. The remote controller light will turn green when it is connected.You will hear a notification sound.
Prepare the APP Make sure you connect to the WiFi. Launch the “Vision+” App and switch to PowerRay.
Base station battery Vehicle battery Base station signal Connection status Master/slave mode Album VR mode switch Camera parameters Sonar mode switch Switch to photo or videos Take photo or videos Bait drop Prompt message Right joystick Left joystick Water Depth Depth maintenance switch Front light control Speed mode “Vision+” APP Description 20
Prepare VR Switch the to VR mode in the app and put the phone into VR glasses. 1.Put phone into bracket and push back the bottom cover. push back the bottom cover Only PowerRay Wizard has this device.
2.Insert the bracket into VR goggle 3. VR goggle head gesture function： Head gesture function activation：Press down the left shoulder button on the controller to enable this function. You can move the PowerRay through head gestures. Release the left shoulder button to disable this function. Only PowerRay Wizard has this device.
Diving and safety 01
Diving and shooting To prevent the user from spinning the propellers accidently outside the water, user needs to unlock the PowerRay to enable the motors. Locking & Unlocking PayerRay -Lock: dial the left finger wheel to the right and press camera/fish finder button for 1 second until it vibrates. H M E -Unlock: dial the left finger wheel to the left and press camera/fish finder button for 1 second until it vibrates.
Modes - The remote controller’s default mode is “MODE4”. PowerRay has 4 modes to control it. Users can choose the mode with their behavior through App.
Diving and shooting with standard controller You can change the speed of the PowerRay by toggling the switch between the two joysticks.
Diving and shooting with App Default mode is “MODE4” 1. Unlock and choose the speed mode: You can click the top right corner button and slide to the right to unlock the PowerRay. You can choose the speed mode at the bottom of the APP interface. 2. Default mode is “MODE4” 3. Lock: To prevent accident from happening, you need to lock the PowerRay. You can click the top right corner icon and slide to the right to lock it.
Finding fish 1.Fish finder needs to be installed on the PowerRay before plugging in the Power cable. 2.After turning on the PowerRay, the fish finder will start to work after it enters in the water. 3.Fish finder will automatically connect to the PowerRay. You can connect to the fish finder Wi-Fi called “PSE_xxx”. No password needed. 4.You can click PowerRay APP to switch to Fish finder interface. Note: You are able to adjust the display parameters to change the display effect.
Diving in a open water Within visual range Depth less than 30m Turn off the base station to save battery Avoid waterweed Fix the base station before use NEVER drop the base station into water Do NOT drag the cable with strong force Do NOT throw into water Avoid Hot environment Do NOT spin motors in the Air outside of the water Do NOT touch spinning propellers 28
FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IC: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exempts de licence d'Industrie Canada.
PowerVision www.powervision.
