CONTENTS P o w e r R a Product overview Introduction/01 y 1 Function highlights/01 List of items/02 Charging and device connector/03 Navigation preparation/03 Activation and navigation/05 PowerRay Body Host overview/06 6 Body part name/06 Navigation mode/07 Status indicator/08 Battery check/08 Remote controller Remote controller overview/09 9 Remote controller part name/09 Remote controller preparation/10 Remote control and operation/11 Remote controller pairing/15 Base station Base s
Fish Finder Overview/18 18 Part name/19 Fish Finder operation/19 Charging/20 Line-towing fishing rig/21 VR Vision+ APP App download/23 22 23 App connection and login/23 App main interface introduction and navigation interface function introduction/24 App motion operation control navigation/26 Photo and video export Mobile device export and share/28 Export videos and photos via Power View/29 Navigation safety 28 30
Product Overview Introduction PowerRay can be used in freshwater or saltwater environments up to 30 meters underwater. It can realize underwater direction-fixed and depth-fixed navigation. The PowerRay can also shoot, seek fish and assist fishing underwater, and realize real-time image preview and motion control through VR goggles, remote controller and App. The equipped 4K camera can achieve 12 Megapixels photos and 4K video shooting.
Product part display VR goggle VR goggle headband PowerRay Pro Vehicle electromagnet, with rubber plug) Wireless base station Communication cable tether (50m) Standard remote controller Standard remote controller supported mobile device Power adapter Power adapter AC power cord 2 fishing rig Fish Finder charging cable Communication cable tether Angler version Explorer version PowerRay (32G, exclusive Line-towing PowerRay (32G, include electromagnet, without rubber plug) Wireless ba
Charging and part connector 4 1 Remote control 2 Base station 3 Host 4 PowerSeeker Navigation preparation 1.Open the switch cover of the PowerRay. PowerVision 2.Open the bottom cover of the PowerRay, remove the top cover of the Fish Finder, and install the Fish Finder clockwise on the PowerRay.
3. Insert the 12-pin end of the communication cable into the host communication cable jack/charging jack and tighten the connector. (Automatically turn on after successful access.) The power is turned on with a prompting sound and a blue light will light up on the tail fin. *Please make sure to tighten the communication cable connected to the PowerRay. 4.Insert the 4-pin end of the communication tether cable into the base station communication jack/charging jack and tighten the connector.
Activation and navigation 1.Turn on the mobile device WIFI, search and access the wireless base station hotspot : PRA_Station_xxx. Default 2.Open the App, complete registration and log into the App. password: 1234567890. 3.If the device is not activated, the App 4.If the device is activated, the App page Activation” button. Click on the button button. Click on the button to start the page will display the “One Touch to activate the device. will display the “Start Navigation” device navigation.
PowerRay host Host overview PowerRay can be used in freshwater or saltwater environments up to 30 meters underwater. It can realize underwater direction-fixed and depth-fixed navigation. The equipped 4K camera can achieve 12 Megapixels photos and 4K video shooting.
Navigation mode The device’s navigation mode is divided into“stable image mode”and“depth-fixed mode”. The navigation mode can be switched by the mode switch button on the remote controller or on the App. The two navigation modes are described as follows: Stable image mode: adjust the angle of the PowerRay and the horizontal plane by the up-and-down joystick and change the view of the PowerRay camera by changing the attitude of the PowerRay, to achieve stable image shooting.
Status indicator Charging Charging: the tail light is slowly flashing light and the head lights are off. Charging completed: the tail light is on solid and the head lights are off. Low battery display When the power is 10%, there’s a low battery alarm and the tail light flickers. To Lock and unlock Lock: tail light flickers for about 1s, and the brightness is set to 15% after locking. Unlock: tail light flickers for about 1s, and the brightness is set to 80% after unlocking.
Remote controller Overview The PowerRay remote controller can be connected to the base station wirelessly, integrating motion control, light adjustment, speed adjustment, photo shooting, video shooting, hook release, depth-fixed control and other functions. Users can easily complete PowerRay operations with the help of the remote controller. The PowerRay remote controller has a built-in rechargeable battery capacity of 3000 mAh and can operate for up to 20 hours.
Remote controller preparation Remote controller preparation H M L 1 .Ta ke o u t t h e sta n d a rd 2.Rotate the button on 3.Clip the phone on the supported mobile device mobile device and pull sure it is clamped. remote controller and the and install the lower end of the mobile device into the remote controller mobile the back of the supported front bracket and make up the upper end of the mobile device. device socket. H M L 4.
Supported mobile device iPad installation illustration H M L 1.Pull out the screw on the supported mobile device. 2.Remove the middle splint from the front of the supported mobile device. 3.Install the lower end of the mobile device into the remote controller mobile device socket. 4.Clip the iPad on the front of the mobile device and make sure it is clamped.
The control mode of the PowerRay remote controller joystick is divided into 4 modes. Users can choose their own control mode through APP.
Speed adjustment gear H M L Electromagnet hook release switch Fish Finder interface switch Mode switch Gear button The three gear switches set the three speed gears of the power system, from bottom to top: L (low gear 0.5m/s) (1 knot) M (medium gear 1m/s) (2 knots) H (high gear 2m/s) (4 knots) Electromagnet hook release switch Long press for 2 seconds to switch the hook release switch. 2.The hook release status, indicator off. 3.The hook adsorption status, indicator on with blue.
Battery indicator/wifi connection status light 1. The battery indicator is divided into red, yellow and green light. 2. Battery>30%, green light on. 3. Battery 10%~30%, yellow light on. 4. Battery<10%, red light on. 5. After the WIFI is connected to the base station, the indicator light is on, and different colors will be displayed according to the battery. 6.If the WIFI is connected abnormally, the indicator will flicker with different colors.
Remote controller pairing Open Vision+ App, select the remote controller settings, and click on remote controller pairing. In the pop-up interface asks to input 6-bit SSID, enter the SSID of the remote controller.
Base station Base station overview he base station is connected to the PowerRay through the communication cable. The remote controller, mobile phone and VR goggle can be connected through the WIFI hotspot of the base station. After connecting, it can control the device, the camera and get real-time images. The base station has a built-in 3000mAh battery for 3 hours of continuous operation. The battery indicator can show current battery level.
Base station operation Turning on and off: long press the power switch button for 3 seconds the indicator light on, means the power is turned on successfully. Press again for 3 seconds to turn off until the indicator is off.
Fish Finder Overview PowerRay Fish Finder* can detect fish and terrain within 40m underwater and display it in real time via Vision+. The bottom of the Fish Finder is equipped with the fish luring light to actively attract fish. The Fish Finder can also be removed for independent use with a fishing pole. *Only Angler version and Wizard version are equipped with the device and functions. Select general settings and click on Fish Finder pairing to scan the QR code.
Part name Fishing line fixed position Lower case Upper case Charging jack Middle case Fish luring light Use of the Fish Finder Use with PowerRay PowerVision 1.Open the hatch case at the bottom of the 2.Open Vision+ App, enter PowerRay Finder, and install it clockwise onto the Navigation”. host, remove the upper case of the Fish PowerRay host.
3.Click the Fish Finder icon button on the main interface or short press the Fish Finder/camera screen switch button to switch to Fish Finder interface and start to use these. Use Fish Finder alone PowerVision 1.Open the upper 2.When the three probes of 3.Turn on the mobile device fishing line, and into water, the system will Fish Finder hotspot “PSE_ case, thread the install back to the Fish Finder.
Current battery Water level Current battery Intelligent Imaging Turn on / off Detection data Depth ruler map Vision+ APP fish finding interface function introduction Line-towing fishing rig Fix the fishing line on the fishing weight magnet and control the PowerRay through the remote controller or Vision+ APP to send the hook to the designated location for fixed delivery. H M L 1.Tie the hook tightly on the fishing rig. 2.
VR Switch the “Vision+” APP interface to VR mode and follow the prompts to insert the mobile phone into the VR goggle. Fixing plate 1.Put the mobile phone into the fixing plate and push to close the gap of the plate cover. 2. Insert the fixing plate cover into the VR goggle 3.
Vision+ APP APP Download To download the Vision+ App, please scan the below QR code or via App Store, and watch video tutorials at Vision+ or www.powervision.me. Asia Europe App connection and login North America 1.Open Vision+ APP. 2.Enter the “Personal Center”, register and log in. 3.Turn on the mobile device WIFI, search and access the wireless base station hotspot: PRA_Station_xxx. Default password: 1234567890. 4.
App main interface introduction and navigation interface function introduction PowerRay Main Interface Picture / Video Interface 24 PowerSeeker Main Interface Service Interface
25
Left joystick Right joystick Up Forward Left turn Down Right turn Backward APP motion operation control navigation Click the settings button on the top right corner.
Select control settings-motion mode. Press the motion control icon on the lower right corner to control.
Photo and video export Mobile device export and share 1. Connect PowerRay, communication cable and wireless base station. Start the device. 2.Turn on the mobile de vice WIFI, search and access wireless base station hotspot : PRA_Station_xxx. Default password: 1234567890. 3.Open Vision+ APP and connect the device. 4.Click on the photo management icon( of PowerRay’s photo interface on the APP. ) 5.
Export videos and photos using PowerView PowerView is a photo and video export tool supporting PowerRay. You can visit the official PowerVision website to download and install the latest version. 1.Connect PowerRay, communication cables and wireless base station. Start the base station. Please ensure sufficient power of the device. 2.Switch on computer WIFI, search and access wireless base station hotspot: PRA_ Station_xxxxxx. Default password: 1234567890. 3.
Navigation safety 30M Navigate in open Navigate within and clear waters Please avoid aquatic Fix the base station other under water before use obstacles No placing in from high altitude environment PowerRay into water 30 away from water No throwing the high temperature Stay away from 98 ft during operation Also tr y and stay in more than 30 meters or visual range plants, gravel and D o n ot t r y a n d d i v e Please do not drop into the water.
China RoHS Name and content of hazardous substances in products Part name Outer case Lead (Pb) Mercury (Hg) Hazardous substance Cadmium (Cd) Hexavalent Polybrominated Polybrominated (Cr6 ) (PBB) (PBDE) chromium + biphenyls diphenylethers Circuit board Cable Camera Motor This form is compiled in accordance with SJ/T 11364-2014. O: indicates the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement of GB/T 26572.
