Safety Guide

ManualsBrandsPowervision Tech ManualsElectronicsUnmanned_Aircraft_Systems

• Maintenance and Upkeep

1. Check every part of the aircraft for any sign of violent impact.

2. Regularly check the intelligent battery level, the smart battery should be kept with a percentage between 30%~60%. If the battery

has been used for over 200 cycles, replace it with a new one. See the Intelligent Battery Safety Guidelines for maintenance of the

intelligent battery.

3. After each use, clean the battery, arms, body, and other parts of the aircraft, install the gimbal protective cover and aircraft

protective shell, and put the aircraft in a dedicated storage box.

4. Remove the battery from the aircraft after each ight.

• Storage and Transportation

Observe the following rules to avoid injuries and damage:

1. Keep the product and its parts out of reach of children. Small parts and wires can be dangerous to children.

2. Do not expose the product to direct sunlight, sources of ignition, heating furnaces, or other high-temperature environments when

storing or transporting it.

1. Keep the battery in a dry, well-ventilated place, out of direct sunlight to prevent the battery from overheating. The recommended

storage temperature range is 0°C - 25°C (32°F -77°F). Do not store the battery in an environment with a temperature lower than 0°C

(32°F) or higher than 45°C (113°F).

2. If storing battery for more than 10 days, set the battery charge level to between 30% and 60%. Long term storing may result in

damage to the battery.

3. Do not allow the product to come into contact with or be immersed in water. If the product drops into water, wipe it with a soft, dry

cloth, and do not power the product on immediately after dropping into water; this may permanently damage the aircraft. Do not

use liquids containing alcohol or other volatile substances to clean the camera lens. Do not store the product in a damp environment.

4. Store the product in a dry environment at a temperature between 10°C and 25°C (50°F and 77°F), and with ambient humidity

between 45-85%.

5. The product must be stored and transported with the gimbal protective cover on, and the aircraft inside its protective shell,

protecting the gimbal, camera, and binocular modules.

The content is subject to change without further notice. View the latest version <PowerEgg X Disclaimer and Safety Guidelines> from PowerVision ofcial website

www.powervision.me

Notice

Warning