Spec Data Sheet

Doc. No. :SPE070W1D1-4 v.1x Rev. No. : 0.1 Page : 24/29
This specification data sheet is an intellectual property of PowerView Display Corporation. Any copy, reproduction
or modification without written permission of PowerView Display Corporation is not allowed.
PowerView Display Corporation, http://www.powerview.com.tw
11.0 Inspection Specifications
11.1 Purpose
This Inspection Specifications are to define the TFT-LCD Modules (hereinafter called "Modules")
inspection standard for customer applying in the incoming receiving process.
11.2 Scope:
Specifications contain
 Display Quality Evaluation
 Mechanics Specification
11.3 Liability
Inspection Deadline
The buyer (Customer) should inspect the modules within fifteen (15) calendar days after
delivery.
Notification of Rejection
The customer may propose to reject one or more lots as the modules fail to meet the AQL
(Acceptable Quality Level). In that case, the customer should notify PowerView in either
documents or mail.
Notification Deadline
The customer should inform PowerView within 3 working days upon finishing inspection. If
the Customer fails to inform PowerView, the right to reject will be lifted.
11.4 Sampling Plan
Unless there is other agreement, sampling plan for incoming inspection should follow
MIL-STD-105E.
Lot size:
Quantity per shipment as one lot (different model as different lot .)
Sampling type:
Normal inspection, single sampling.
Sampling level:
Level II.
AQL:
Acceptable Quality Level
Major defect: AQL=1.0
Minor defect: AQL=2.5