Spec Data Sheet

Doc. No. :SPE070W1D1-4 v.1x Rev. No. : 0.1 Page : 21/29
This specification data sheet is an intellectual property of PowerView Display Corporation. Any copy, reproduction
or modification without written permission of PowerView Display Corporation is not allowed.
PowerView Display Corporation, http://www.powerview.com.tw
9.0 Storage, Operation & Others
a) Do not leave the panel in high temperature, and high humidity for a long time. It is highly
recommended to store the module with temperature from 0 to 35°C and relative humidity of
less than 70%.
b) Do not store the TFT-LCD module in direct sunlight.
c) The module shall be stored in a dark place. It is prohibited to apply sunlight or fluorescent light
during the store.
d) Do not connect or disconnect the module in the "Power On" condition.
e) Power supply should always be turned on/off by the item 3.2 "Electrical Absolute Ratings"
f) The liquid-crystal is deteriorated by ultraviolet rays. Do not leave it in direct sunlight and strong
ultraviolet rays for many hours.
g) Avoid condensation of water. It may result in improper operation or disconnection of electrode.
h) Do not exceed the absolute maximum rating value. (The supply voltage, input signal voltage,
environment, and so on). Otherwise the panel may be damaged.
i) If the panel displays the same pattern continuously for a long period of time, it can be the
situation when the image "Sticks" to the screen.
j) If the module has its circuitry FPC with it, please handle it carefully and prevent the FPC to be
stressed.