Spec Data Sheet

Doc. No. :SPE070W1D1-4 v.1x Rev. No. : 0.1 Page : 20/29
This specification data sheet is an intellectual property of PowerView Display Corporation. Any copy, reproduction
or modification without written permission of PowerView Display Corporation is not allowed.
PowerView Display Corporation, http://www.powerview.com.tw
8.0 General Notice
8.1 Reliability Test Items
No. Test Items Conditions Remark
1 High Temperature Storage
Ta= + 80℃
240 Hrs
2 Low Temperature Storage
Ta= - 30℃
240 Hrs
3 High Temperature Operation
Ta= + 70℃
240 Hrs
4 Low Temperature Operation
Ta= - 20℃
240 Hrs
5
High Temperature and High
Humidity
Ta= 50℃, 80%RH
240 Hrs Operation
6 Heat Shock
-30~80℃/100 cycles 1Hr/cycle
Non-operation
7 Electrostatic discharge
Contact = ± 4 kV, Class B
Air = ± 8 kV, Class B
Non-operation
8 Vibration
Frequency range : 8~33.3 Hz
Stroke : 1.3mm
Sweep : 2.9G, 33.3~400Hz
Cycle : 15 minutes
2 hours for each direction of X,Z
4 hours for Y direction
Non-Operation
9 Mechanical Shock
100G, 6ms, ±X±Y±Z
3 times for each direction
JIS C7021, A-7
Condition C
Non-Operation
10 Vibration (with carton)
Random vibration :
0.015G2/Hz from 5~200Hz
-6dB/octave from 200~500Hz
IEC 68- 2-34
11 Drop (with carton)
Height : 60 cm
1 corner, 3 edges, 6 surfaces
JIS Z0202
Note (1): Ta: Ambient temperature.
Note (2): In the standard conditions, there is not display function NG issue occurred. All the cosmetic
specification is judged before the reliability stress.