Manual

2
Introducon
Welcome to the growing family of LOCK-RIGHT owners!
This manual will help you install your new LOCK-RIGHT automac
100% full-locking dierenal. When the installaon is complete,
your vehicle will have extreme tracon! We trust that you will be
pleased with its performance and thank you for your condence
in our products.
LOCK-RIGHT installaon simply involves disassem-
bling and re-assembling the dierenal case, replacing a few
parts in the process. These instrucons are detailed to the
point that a person who is reasonably familar with automove
work can install a LOCK-RIGHT into a third member in about
three to four hours; please read them carefully before you start
to be sure that you thoroughly understand them. Do not at-
tempt shortcuts unless you know exactly what you are doing.
These instrucons also assume that you have the proper shop
manual for reference to instrucons about axle removal, torque
values, sengs, clearances, etc. that apply to your parcular ve-
hicle. Our manual is a general guide to operaons but does not
contain specic informaon for each vehicle.
We suggest that your rst installaon be done in the
rear axle. The weight of the engine over the front axle is reduced
by weight transfer to the rear as your vehicle climbs a hill, mean-
ing that more and more weight is being applied to the rear axle,
where the locker is located, as more tracon is needed.
Remember: This instrucon manual is provided for your
convienience to assist you or your mechanic with the installaon
of your new LOCK-RIGHT. However, the ulmate responsibility
for the success of your installaon and the subsequent proper
operaon of your vehicle rest with you, the vehicle owner.
When your installaon is complete, you will have a vehi-
cle with signicantly increased capabilies. For connued “fun in
the sun,” operate it in a safe and responsible manner. Be sure to
read and understand the driving informaon in the LOCK-RIGHT
Vehicle Owner’s Manual!