Manual
12
Figure 7
Install coupler/thrust washer assemblies
5. Repeat this step for the other driver-and spacer
assembly (Figure 8).
Dierenal Case Compleon
Summary of steps in this secon:
a) Rotate drivers; align holes
b) Push shear pin into other driver
c) Install spring assembly
d) Repeat for other pins and springs
e) Push spacers outward
f) Install pinion sha and retaining pin.
1. Rotate the right driver unl one of its long window
holes (containing a pin faces out, and rotate the other driver unl
one of its empty pin holes lines up with the rst window hole.
2. Push the pin out of the window hole and into the pin
hole in the opposite driver with a small pointed tool (Figure 9).