Product Manual

MAINTENANCE POWERTEK
HYDRAULIC OIL
Use- SAE 2OW Hydraulic Oil - In hydraulic Pump (16267) only. You will need to check the
hydraulic oil level in both the transmission and the gear reducer. To check the transmission read
the level mark located on the bottom of the fill cup. Use SAE 2OW hydraulic oil to fill the
hydrostatic transmission. To check the gear reducer (16268) you will need to get, underneath the
stump grinder. After removing the orange plug, you can check the level with your fingertip or
use a squeeze container to fill the reducer until some oil drips out of the hole. Then re-plug the
hole. Use SAE 90 weight gear lube in gear reducer, (See fig 12).
(Fig. 12)
CheckGear
Reducer Oil
Check
Hydraulic Oil
MAINTENANCE SCHEDULE
Daily Weekly Monthly Yearly/as Required
Check engine oil
X
Check Machine Tire Pressure
X
Inspect/Check Engine Cooling Fins
X
Check for Loose Bolts
X
Check Hitch and Safety Chains (PT only)
X
Check Stump Grinder Teeth
X
Check Air Cleaner
X
Grease Bearings
X
Check Belts for Proper Tension
X
Check Hyd. Transmission Oil Level (SPH)
X
Check that Clutch is Working Properly
X
Check Rubber Guards
X
Check and Gap Spark Plugs
X
Change Engine Oil as Indicated in Engine Manufacturers Owners Manual
14