Product Manual

OPERATION POWERTEK
STARTING (Fig. 2 & 3)
1. Turn the ignition switch to on position.
2. Slide the choke to close.
3. Raise cutter wheel off the ground (wheel starts with engine.)
4. Depress the operator presence control bar and pull the rope to start the engine.
5. Keep the control bar depressed and slide the choke open.
Important Note: The control bar is designed as a safety feature. The engine will
not start or operate without depressing the presence control bar.
Choke Ingnition Switch Brake Presence Control Bar Brake
7
(Fig. 2) (Fig. 3)