Quick Start Guide

Manual: PTG Controller Quick Start Guide
5
2 Using the Controller
The LCD display is the primary source of information of the controller. The LCD allows
you to view/change settings and monitor the status of sensors and other engine
peripherals.
2.1 Front Panel Items
Item
Name
Description
Off Button
Used for turning off the engine or exiting out of
Auto mode. This is not intended to function as an
Emergency Stop as there are conditions in which
it will not shutdown the engine.
Auto Button
Used for placing the controller into Auto mode.
Once in Auto the controller waits for a start
command to be received.
Run Button
Used to start the engine manually. Must use the
Off button to shutdown the engine if started from
front panel.
Up Button
Used for moving around in the menu, changing a
settings value, or changing the currently displayed
parameter page.
Enter Button
Used for entering the menu system, accepting
settings, or locking the LCD screen when viewing
parameters.
Down Button
Used for moving around in the menu, changing a
settings value, or changing the currently displayed
parameter page.
Generator LED
Green = Engine running with no issues
Amber = Engine running with warnings
Red = Engine shutdown on failure