Manual: PTG Controller Quick Start Guide MANUAL PTG Controller Quick Start Guide Power Technology Southeast, Inc. 634 SR 44 W. Leesburg, FL 34748 352-365-2777 Fax: 352-787-5545 www.powertech-gen.
Manual: PTG Controller Quick Start Guide Please read these instructions carefully prior to installing and operating this generator. If you have any questions please feel free to contact us at 800-7600027 or via our website at www.powertech-gen.com The use of any spare parts that are not genuine or not expressly authorized shall free Power Technology Southeast, Inc. from any warranty liability and any responsibility concerning conformity to regulations and relevant consequences.
Manual: PTG Controller Quick Start Guide Table of Contents 1. Introduction .............................................................................................................. 4 2. Using the Controller ................................................................................................ 5 2.1. Front Panel Items 2.2. Using the Menu System 2.3.
Manual: PTG Controller Quick Start Guide 1 Introduction The PTG series controllers are designed to provide complete control, protection, AC metering, and engine instrumentation for both standard and electronic engines. The module is easily configured using either the front panel buttons. PTG series controllers are ideally suited for severe duty applications where reliability is critical such as mobile and stationary generators.
Manual: PTG Controller Quick Start Guide 2 Using the Controller The LCD display is the primary source of information of the controller. The LCD allows you to view/change settings and monitor the status of sensors and other engine peripherals. 2.1 Front Panel Items Item Name Description Off Button Used for turning off the engine or exiting out of Auto mode. This is not intended to function as an Emergency Stop as there are conditions in which it will not shutdown the engine.
Manual: PTG Controller Quick Start Guide 2.2 Using the Menu System Task Description Entering Menu When in the OFF mode, press the enter button to bring up the menu. Navigating Menu Once in the menu, use the up and down arrows to navigate. Pressing enter will move you into that menu. Scroll Parameters When in Auto or Running mode, pressing the up and down arrows will scroll through the parameters pages.
Manual: PTG Controller Quick Start Guide Starting and Stopping Methods Methods Description Manual Run Pressing the Run button will start the engine. You must press the OFF button to shutdown the engine. Remote Start / Stop Input When in AUTO mode remote starting of the engine is enabled. Battery Recharge (optional) When the battery voltage drops below a certain level the engine will start and run for a predetermined amount of time.
