User's Manual

USB Smart Surge Manual All Versions V1.0
13
USB Smart Surge Manual All Versions V1.0
14
USB Smart Strip Type Surge Protector
* 2 “Always-On” Outlets
Provide continuous power for connected devices
* 4 “Energy Saver” Outlets
Controlled on/off by USB Transmitter
* Protected Indicator Light
The green light illuminates to indicate the surge protection is active
* Grounded Fault Indicator Light
The red light only illuminates to indicate that the power outlets are
not properly grounded
* Energy Saver On Indicator Light
The blue light illuminates to indicate the Energy Saver Outlets are
switched on
*Always On Indicator Light
The green light illuminates to indicate that the Always On Outlets
are active
* Manual ON/OFF and Learning Button
Press the button to power on/off the Energy Saver Outlets or execute
learning function
* Circuit Breaker Reset Button
Reset the circuit breaker after a current overload at 15 Amps.
Disconnect all equipments before executing reset button
Electrical Rating
Surge Suppression
Clamping Voltage
Optional Secondary
Stand-by power
15A / 120V, 60Hz, 1800 Watts
1080 J
400 V
2 ports USB Charger (5V, total 1.5 Amps)
Combo Phone Line (RJ11) & Network (RJ45) Protection
DSS/COAX Connector Protection
<0.7W
USB Smart Block Type Surge Protector
* 3 “Always-On” Outlets
Provide continuous power for connected devices
* 5 “Energy Saver” Outlets
Controlled on/off by USB Transmitter
* Protected Indicator Light
The green light illuminates to indicate the surge protection
is active
* Grounded Fault Indicator Light
The red light only illuminates to indicate that the power
outlets are not properly grounded
* Energy Saver On Indicator Light
The blue light illuminates to indicate the Energy Saver
Outlets are switched on
*Always On Indicator Light
The green light illuminates to indicate that the Always On
Outlets are active
* Manual ON/OFF and Learning Button
Press the button to power on/off the Energy Saver Outlets
or execute learning function
* Circuit Breaker Reset Button
Reset the circuit breaker after a current overload at 15 Amps.
Disconnect all equipments before executing reset button
Electrical Rating
Surge Suppression
Clamping Voltage
Optional Secondary
Stand-by power
15A / 120V, 60Hz, 1800 Watts
2160 J
330 V
2 ports USB Charger (5V, total 1.5 Amps)
Combo Phone Line (RJ11) & Network (RJ45) Protection
DSS/COAX Connector Protection
<0.7W
ENERGY SAVER
PROTECTED
GROUNDED FAULT
ENERGY SAVER ON
ALWAYS ON
PROTECTED GROUNDED FAULT ENERGY SAVER ON
ENERGY SAVER
ALWAYS ON