User's Manual

LEARNING function

The USB Transmitter and the Surge Protector in the kit are pre-paired and ready

to use.

If you purchase another compatible Surge Protector, you can pair the exiting USB

Transmitter with the new purchase Surge Protector.

1. Hold the USB Transmitter close to the Surge Protector.

2. Press and hold the learning button on the Surge Protector for 5 seconds. At this

time, the ENERGY SAVER ON indicator light will go flashing.

Note : you can release the button once the indicator light goes flashing

3. When the indicator light starts to flash; within 5 seconds, press the button on

the USB Transmitter to pair it with the Surge Protector.

4. If the Surge Protector has successfully learned the code from the USB

Transmitter, the ENERGY SAVER ON indicator light will go from flashing to solid

light, then go off.

5. Redo step 2~4 if learning is not successful.

SPECIFICATIONS

USB Smart Surge Manual All Versions V1.0

Wireless USB Transmitter

* ON/OFF Button

Press the button to turn on/off the Energy Saver

Outlets remotely

* Activation Indicator Light

The red light illuminates to indicate the USB

Transmitter is being activated

* Wall Mount Stand for USB Transmitter

The stand can be used as a wall mount or docking stand

Battery Type

Battery Life

Activation indicator

Wireless Range

Use ONLY A23 12V Alkaline

Approx. 3-6 months

Red LED

Up to 25 ft (Open Space)